Customer Service Second To None

N4PY software now 32 bit.

N4PY Software for your Ten-Tec Orion and Orion II, Omni VII, Pegasus, Jupiter, Argonaut V, RX-350, RX-320, RX-331, or RX-340 

The Elecraft K2 and K3 are fully Supported

Kenwood TS-850, TS-950, TS-570, TS-870, TS-480, and TS-2000 are now
supported.

ICOM IC-703, IC-775, IC-756, IC-756Pro, IC-756PROII, IC-756ProIII, IC-706MKIIG, IC-746, IC-746PRO, IC-718, IC-781, IC-7000, IC-7200, IC-7600, IC-7700, and IC-7800 are now supported.

My control program software has been in use since October, 1999. The
Pegasus/Jupiter control program has been through 64 version updates
during this time. It is a very mature and stable product. Most of
the added features are a direct result of user input. All the emphasis
has been on the product and not on this website!

In order to get my software, you must be a registered user. Over the
past year, there has been a new versions of my software every 1 to 3
months. As a registered user, you will receive free updates as they
come out for a period of 1 year. After the year expires, you will no
longer receive updates until you renew your registration. Any version
you received prior to your registration expiring, will continue to
operate for as long as you use it. Your license to use the software
you have received is lifetime.

As long as your registration is current, updates will be emailed to
you as they come out. Also, as a registered user, I will give you
all the help I can via email to resolve any problems you may run
into. The Pegasus/Jupiter software has been reviewed in the May
2001 QST on page 65. There are also several reviews on my
software at www.eham.net.

To become a registered user for any of my my software products, mail a
personal check (I do not wait for it to clear) for the product amount
in US dollars to:

Carl Moreschi N4PY
121 Little Bell Drive
Bell Mountain
Hays, North Carolina 28635

If you do not have internet access and want the software on
diskette or CD, there is an additional charge of $10.00 for
a diskette or CD mailed directly to you.

All my software runs on all windows operating systems including Windows 95,
98, 98SE, ME, NT, 2000, XP and Vista (including the 64 bit versions of XP and Vista).
This software does NOT run under Windows 3.1.

My programs have support for the Telepost LP-100A watt meter and also the Telepost
LP-Pan panadapter.  See www.telepostinc.com for information of these products.


All my software also has support for the Griffin Technology Powermate.
This is a knob that is connected to the USB port and can be used as
a software controlled tuning knob. This is very helpful for radios
that do not have a remote tuning pod as this allows knob tuning while
using full software control of the radio. For information on this
USB tuning knob (called the "Powermate"), see www.griffintechnology.com

All my programs now fully support the LDG AT-200PC Autotuner.
By using this tuner, tuning your antenna has never
been easier. This allows the program to recall tuner settings
when going to a new band without the need to transmit.

All my programs now fully support the LDG DTS-4 and DTS-6 coax
antenna switch via serial port control. This means my program
will automatically select each antenna position via frequency ranges
that you define for each antenna switch position. There is also a
simple way to manually select antenna positions via a mouse click.

All my programs now fully support the Tokyo High Power Amplifier HL-1.5KFX.
Regardless of what radio you are actually running, my program will send
Kenwood commands to this amplifier through a second serial port. This
allows full automatic band switching for the amplifier even with Tentec
radios.

NEW - N4PY User's Group on Yahoo -
http://groups.yahoo.com/group/n4pysoftware/

Products:

Orion and Orion II Control Program
First Time Registration $65 (This includes one year of free program updates.)
Annual Renewal $30.00
Click on image for larger picture
Click HERE for user manual. Close either window to return here.

This is the N4PY Orion Control Program. It will control
an Orion or Orion II transceiver. Additionally, it will allow
an RX-340 to be used as an alternate receiver to the Orion.
The Orion program features "Smart VFO". This is an intelligent
algorithm that automatically assigns the best receiver to VFO A
and VFO B depending on the frequencies of each VFO making the ham band
only limitation of the Orion's main receiver almost unnoticeable.
The software also allows the seemless use of transverters
for the VHF/UHF bands with the display showing the transverter frequency.
Full configurability directly from the program is available. You
can even adjust the values for fast, medium, and slow AGC. There is
also now a separate front panel slider to control AGC Theshold. And the
nice part about this control is it is remembered by band.
Additionally, there is a save/restore feature for the internal
memories of the Orion. You can select to run the program in Front
Panel control mode and have the program monitor the operation of the
Orion. This allows the software to export a pegasus file interface to
any logging program that can work with a pegasus. The end result is you
can now have full logging control of the Orion while the Orion is in
front panel control. You can also decide to run the Orion entirely
from the program and not use the Orion front panel controls at all.

Icom Control Program
First Time Registration $65.00 (This includes one year of free program updates.)
Annual Renewal $30.00
Click on image for larger picture
Click here for a screen shot for the new ICOM IC-7800
Click HERE for user manual. Close either window to return here.

This is the N4PY Icom Control Program. It will control
an IC-756PRO, IC-756PROII, IC-756PROIII, IC-706MKIIG, IC-746, IC-746PRO,
IC-703, IC-775, IC-756, IC-718, IC-781, IC-7000, IC-7200, IC-7600, IC-7700 and IC-7800.
This program allows full control of your Icom transceiver from your
computer. The software also allows the seamless use of transverters
for the VHF/UHF bands with the display showing the transverter frequency.
Additionally, there is a save/restore feature for the internal
memories of your Icom transceiver. In addition to controlling the program
from a computer, you can also control frequency and mode directly from the
radio with the program keeping up with the changes.
This allows the software to export a pegasus file interface to
any logging program that can work with a pegasus.

The program also has a spectrum sweep that alows you to see the entire
band at a glance and use your mouse to click on signals you wish to
listen to.

Starting with version 1.25, full memory file support is now provided
to program all 5 memory banks of the IC-7000 including 9 character
memory names and split transmit status. This is done very simply
with ascii text files that allow saving all the current memory contents
to a file and restoring then from a file back to the IC-7000.

Pegasus/Jupiter/Omni VII,RX-350/RX-320/RX-340 Argonaut V
Elecraft K2/Elecraft K3/Kenwood
Flex-5000, Flex-3000, and SDR-1000 software

First Time Registration $65.00 (This includes one year of free program updates.)
Annual Renewal $30.00
Click on image for larger picture.
Click HERE for user manual. Close either window to return here.

This is the N4PY Pegasus Control Program. It will control
a Pegasus, Jupiter, Omni VII, RX-320, RX-330, RX-331, RX-340, RX-350,
Argonaut V, Elecraft K2, Elecraft K3, Kenwood TS-850, TS-950, TS-570, TS-870, TS-480,
or TS-2000 or FLEX-5000, FLEX-3000, and SDR-1000 as a primary radio. Additionally, it will allow an RX-320,
RX-350, second pegasus, second Jupiter, or second Elecraft K2 to be used as
a sub-receiver to the primary radio with the sub-receiver following
VFO B. And with the Omni VII as the primary radio, you can have the RX-320,
Pegasus, Jupiter, or RX-340 as the sub-receiver. This allows for full
dual receive capabilty for DXer's. The software also allows the
seemless use of transverters for the VHF/UHF bands with the display
showing the transverter frequency. Full configurability directly from
the program is available. Additionally, there is a save/restore feature
for the internal memories of the Jupiter, RX-350, and Argonaut V. You
can also run the Jupiter, Omni VII, or Argonaut V in Front Panel control
mode and have the program monitor the operation of the these radios.
This allows the software to export a pegasus file interface to any
logging program that can work with a pegasus. The end result is you
can now have full logging control of the Jupiter, Argonaut V, or Omni VII
while they are in front panel control.

The Elecraft K2 can be used as the primary radio. Additionally, an rx320
or second K2 can be added to the primary K2 for full dual receive. When
two K2's are used, the exported operating frequency for logging programs
is based on the last transceiver that transmitted. When using this
program with a K2, you can still use logging programs by configuring the
logging programs to use a TenTec Pegasus file interface. The K2 can
simultaneously be controlled from the program or the K2 front panel.


Reasons to use the N4PY program with your Flex Radio

Antenna control through parallel port or LDG coax serial switch
Front panel control of noise blanker values
Front panel control of flex 5000 antenna selection including receiver only ant
My help and adding features as required quickly
control of external antenna tuners
clicking on panadapter display always sets transmit frequency
Separate band buttons for CW and SSB.
Band buttons for SWL with user definable ranges
Very quick up 5 button
Low cut and High cut controls
Most functions can be controlled with mouse wheel, not just frequency and
 mouse wheel has a high speed setting as well.
Separate default AGC settings by mode
Frequency event timer to allow automatic changing of frequency by times for
an unattended receiver to listen to on the internet
10 minute automatic CW ID
Frequency scan
Separate comport for Steppir and External amplifier control
Full K1EL winkey keyer support
Transmit protection by license class to not allow transmit unless
 ok with license class. This includes mode and prevents accidental
 transmission of SSB in the CW portion of 40 meters.
Power level saved for each band. And also power output for an
amplifier is saved by each band. And CW band is separate from an SSB band. 


The Kenwood TS-850, TS-570, TS-870, TS-480, and TS-2000 can be used as
the primary radio. You can add a tentec rx320 and get full HF dual
receiver operation. When using this program with a Kenwood radio, you
can still use logging programs by configuring the logging programs to
use a TenTec Pegasus file interface. The Kenwood radio can simultaneously
be controlled from the program or the radio front panel.

The program will control both receivers in the Kenwood TS-950 for full
HF dual receive operation. The program will not control the sub-receiver
in the TS-2000 since the TS-2000 sub-receiver is VHF/UHF only.

When using the RX-330, RX-331, or RX-340 top of
the line receivers with a Pegasus or Jupiter , the program
allows full transceive operation. The RX-331/RX-340 becomes
the main receiver with the Pegasus/Jupiter receiver
following VFO B to allow full dual receive. This is
a dynamite setup representing the ultimate transceiver
configuration. The software will also allow the RX-331
or RX-340 to be used standalone without a Pegasus or
Jupiter. There is a small modification required to the
Pegasus/Jupiter to allow the two receivers to share the
same antenna. Also, a fairly simple interface box must
be constructed for the software to control muting between
the two radios. There is a review of this software at
www.eham.net under HF Transceivers "Ten-Tec RX340/Pegasus
System".

N4PY DX Spots Program
 First Time Registration - Free to all registered users
 Annual Renewal Registration - Free to all registered users

Screen Shot          Users Manual

The N4PY DX Spots program consists of several programs that work together. These program
and data files are designed to work with all N4PY Radio Control programs. All these programs use the TenTec
file interface. The DX Spot program will only work with N4PY Radio Control programs. The main goal of the
program suite is to provide real time DX spot information, easy setting of the radio to the DX spot
frequency, automatic and manual checking of the DX spot against the user's DXCC records and DXCC, WAS,
and grid square record keeping. There is also a way to import a cabrillo log file into the program to
get your logs and DXCC statistics converted to N4PYLog format quickly. Once you have your log data imported into N4PYLog, your DXCC records can be automatically updated from your log information.
The real time DX Spot information comes from a DX Cluster internet connection.
This program is available for download by current registered users in the n4py software user's
group "files" area in Yahoo groups.

If you have questions concerning my software please send me email at: n4py2@earthlink.net

You are visitor number  since 14 October 2001.

Page last updated 13 November 2009.